Updated November 2026

Landscape edging cost per foot depends mainly on the material you choose, how much of the work you do yourself, and the condition of the ground where the edging will go. This guide shows you how to measure your bed lines, compare material categories, and turn a per-foot figure into a realistic project budget. Costs are described in terms of relative ranges and cost drivers rather than fixed figures, since local labor rates and supplier pricing vary widely.

Step 1: Measure Your Edging Run Accurately

Start with a total linear footage, not square footage. Walk the perimeter of each bed and measure straight sections with a tape. For curves, lay a flexible garden hose or a length of string along the line, mark it, then measure the marked length. Most contractors add 5 to 10 percent to the total to cover cuts, corners, and breakage, so build that buffer into your estimate.

Step 2: Compare Material Categories

The material you pick sets the baseline for your landscape edging cost per foot. Lower-cost options usually include plastic and aluminum strips, which are light and simple to install. Mid-range choices often include steel, pressure-treated wood, and composite products. Higher-cost options include stone, concrete, and brick-style pavers, which need more base preparation and more labor.

Material Category Relative Cost Level Install Difficulty Best Use
Plastic or recycled plastic Low Easy Curved beds, DIY projects
Aluminum or rolled steel Low to mid Easy to moderate Clean straight lines
Pressure-treated wood or timber Mid Moderate Raised beds, retaining edges
Concrete or stone Mid to high Difficult Permanent, high-visibility borders

Step 3: Factor In Labor and Site Conditions

Labor often adds more to the total than the material itself, especially for stone or concrete. Professional installers generally charge by linear foot, and the per-foot rate rises when the job involves digging a trench, setting a gravel base, or cutting through tree roots. Hard clay, rocky soil, and slopes all increase time on site. If you plan to install edging yourself, the labor line drops to zero, but you will need tools and time.

Tips for Estimating Labor

  • Get at least two written quotes that list material and labor separately.
  • Ask whether the quote includes removing old edging or sod.
  • Confirm whether the installer provides a base material such as crushed stone.

Step 4: Build a Simple Budget Formula

Use this formula to estimate your project: total linear feet (plus 10 percent) × material cost per foot + labor cost per foot + supplies such as stakes, base gravel, and landscape fabric. Run the numbers for two or three materials side by side. This shows you how much the choice of material changes the total, which often matters more than small differences in labor.

Common Mistakes to Avoid

  • Measuring only the straight sections and forgetting curves or corners.
  • Skipping the 10 percent overage for cuts and breakage.
  • Comparing quotes that include different base preparation.
  • Choosing lightweight edging for soil that heaves or washes out.
  • Forgetting disposal costs for old edging or excavated soil.

A sturdy measuring wheel makes it faster to track linear footage across long beds, and a flexible garden hose helps you lay out curves before committing to a line. A rubber mallet is useful for seating metal or plastic edging without damaging the surface. Search for these items with View on Amazon, View on Amazon, and View on Amazon.

FAQ

Is landscape edging cost per foot the same for every material?

No. Plastic and aluminum typically sit at the low end, while stone and concrete sit at the high end, and labor can shift the total significantly for harder materials.

Should I add extra footage to my edging estimate?

Yes. Adding around 10 percent covers cuts, corners, and breakage, which helps prevent a short order mid-project.

Can I reduce the total cost by installing edging myself?

Yes, DIY installation removes the labor line, though you will need tools and time. Materials that need a concrete base or heavy excavation are harder to install without experience.

Conclusion

Landscape edging cost per foot is driven by material, labor, and site conditions, so start by measuring your linear footage accurately. Compare at least two material categories using the same formula, and include a buffer for waste. For more detail on specific options, see How Much Does Landscape Edging Installation Cost? Price Factors Explained and Low Cost Landscape Edging: 6 Best Budget Picks for Clean Lines.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our lawn edging & trimming guides, checking product details against manufacturer specifications and owner feedback.