Updated November 2026
Landscape edging concrete forms are the temporary frames that hold wet concrete in the shape of a lawn border, walkway edge or garden bed curb. Set them correctly and you get straight, level edging with crisp top edges. Set them poorly and you get wavy lines and a border that heaves within a season. This guide walks through planning, building and filling the forms so the finished edge looks deliberate.
Plan the Layout and Depth
Start by marking the edge line with a garden hose or spray paint, then step back and check the curve from several angles before committing. Most residential concrete edging runs 4 to 6 inches wide and 4 to 6 inches deep, with a finished top sitting about 1/2 inch above the adjacent lawn or mulch. Excavate to a depth of about 8 inches so you have room for a 4-inch gravel base plus the concrete.
Shopping for one? See our guide: 7 Best Concrete Landscape Edging Machine Options for Clean Lines (2026).
Keep forms at least 2 feet from large tree roots and out of the path of underground utilities. Call 811 before you dig in the United States so buried lines can be marked.
Build and Set the Forms
Forms are usually made from straight lumber, flexible plastic or metal sheeting, or purpose-made curb forms. Lumber works well for straight runs. For curves, use flexible plastic or thin material that bends without kinking. Secure the forms with stakes spaced every 18 to 24 inches so they do not shift under the weight of wet concrete.
Check the top edge of each form with a level as you go. Pin the form so its top is at the finished height you planned, and check that the inside face matches the layout line.
Prepare the Base
Fill the trench with 3 to 4 inches of compacted crushed stone or gravel. Tamp it in lifts of about 2 inches. A firm base is what keeps the edging from cracking as the soil moves through freeze-thaw cycles.
Mix, Pour and Consolidate the Concrete
Use a mix rated for flatwork or curbs with a compressive strength of at least 3,000 psi. Pour in one continuous action when possible, working the concrete into the corners first. Insert a rod or shovel along the inside of the form and tap the outside with a rubber mallet to release trapped air bubbles.
Screed the top flush with the form edges by drawing a straight board across them, then float the surface lightly to close the pores.
Add Control Joints
Cut control joints every 6 to 8 feet with a jointer or grooving tool. This gives shrinkage cracks a planned place to form instead of appearing randomly across the border.
Cure, Strip and Finish
Keep the concrete damp for at least 3 days, or cover it with plastic sheeting to slow moisture loss. Strip forms after 24 to 48 hours once the edges hold their shape without slumping. Backfill the outside with soil or mulch, and avoid driving over fresh edging for a full week.
Recommended gear
- Flexible form material: bends cleanly around curves and holds its shape under wet concrete. View on Amazon
- Concrete edger tool: rounds the top corners for a finished look and prevents chipping. View on Amazon
- Rubber mallet: tapping the form releases trapped air and helps the concrete settle. View on Amazon
Common Mistakes to Avoid
- Skipping the gravel base, which leads to sinking and cracking.
- Letting forms drift out of line because they were not staked tightly.
- Pouring in hot afternoon sun or freezing weather without protection.
- Removing forms too early, causing edges to crumble.
- Forgetting control joints, so cracks appear in random spots.
For a broader look at the finished product, see Poured Concrete Landscape Edging: A Step-by-Step Guide for Clean Lines and Concrete Landscape Edging Installation: A Step-by-Step Guide. If you are weighing alternatives, Concrete Block Landscape Edging: A Step-by-Step Guide (2026) covers a no-pour option.
FAQ
How long should concrete edging forms stay in place?
Most forms can be removed after 24 to 48 hours, once the concrete holds its shape. Wait longer in cold weather, since curing slows down.
What concrete mix works best for landscape edging?
A standard flatwork or curb mix rated at 3,000 psi or higher is typically suitable. Check the bag for the strength rating before buying.
Can I reuse concrete edging forms?
Yes, if they are made of plastic or metal and show no cracks or warping. Wood forms can be reused a few times but often need replacing after one or two projects.
Conclusion
Good landscape edging concrete forms depend on a firm base, tight staking and a level top edge. Pour carefully, add control joints and give the concrete time to cure before stripping. Take these steps in order and your border will look sharp for years.
