Caleb MorganBy Caleb Morgan

Updated November 2026

Finding landscape edging stone nearby is faster when you know what to look for before you start calling yards and suppliers. This guide walks you through choosing a stone type, estimating how much you need, and checking that the product will hold a clean line in your soil. The goal is a border that stays straight and sits flush with your lawn for years.

Decide on Stone Type and Style First

Stone edging falls into a few broad families, and each one behaves differently in the ground. Natural cut stone looks the most authentic but is heavy and often sold by the pallet. Stacked stone and faux stone units are lighter, easier to carry, and usually interlock or sit on a base. For a comparison of styles you can actually find locally, see Top 5 Landscape Edgings with Stone Options for Clean Garden Borders and Top 7 Landscape Edging Faux Stone Options for Clean Garden Borders.

Shopping for one? See our guide: 6 Best Landscape Edging Natural Stone Options for Clean Borders (2026).

Color matters less for function than people expect, but it affects how the border reads against your mulch and turf. Gray and black stones hide dirt well, while white or light stone can look bright and may show staining sooner.

Estimate Quantity and Dimensions

Measure the total linear feet of border you plan to build, then add about 10 percent for cuts, corners and breakage. Check the unit length and height the supplier lists, since a six-inch-tall edger and a four-inch-tall edger need very different amounts of stone for the same run. Most landscape edging is set so that about one-third to one-half of the stone’s height sits below grade, which keeps it from tipping as the soil shifts.

  1. Measure the border in linear feet, including curves.
  2. Add 10 percent for waste and cuts.
  3. Divide by the stone length listed by the supplier to get the piece count.
  4. Confirm the weight per pallet or per piece before you arrange delivery.

Check Local Sources and Delivery Options

Start with building supply yards, stone and masonry yards, and garden centers that carry hardscape materials. Many of these sell by the pallet and can deliver, which matters for heavy natural stone. Ask whether they stock the product in person or need to order it, and whether they carry matching base material such as crushed stone or paver base.

Before you visit, check the official website or call ahead to confirm current stock, delivery areas and pickup procedures. Hours, delivery fees and availability change, so verify them directly rather than relying on a listing you found online.

Prepare the Base and Set the Stone

A stone border lasts only as long as its base. Dig a shallow trench about two to three inches deeper than the stone’s buried portion, then fill it with compacted crushed stone or paver base. Set each piece on the base, check that the top edge is level with its neighbors, and backfill behind it. Use a string line between stakes to keep the run straight, and check the height every few feet.

Tips for Clean Results

  • Compact the base in layers of about two inches so the stone does not settle unevenly.
  • Set stones with a slight backward lean toward the bed, so the mulch side is held firmly.
  • Leave the joints tight, or fill them with fine stone dust for a finished look.
  • Test the layout by laying the pieces out dry before you dig.

Common Mistakes to Avoid

  • Buying by appearance alone without checking the height and weight of each piece.
  • Setting stone directly on loose soil, which allows heaving and tipping.
  • Underestimating the number of pieces needed for curves and corners.
  • Skipping the string line, which leads to a wavy border that is hard to correct later.
  • A stone-setting level helps you keep each piece at the same height across the run. View on Amazon
  • A plate compactor firms the base in layers, which prevents settling under heavy stone. View on Amazon
  • Marking paint or stakes with string hold the line steady while you set each piece. View on Amazon

FAQ

How deep should landscape edging stone be buried?

Most installers bury about one-third to one-half of the stone’s height so it resists tipping. Check the manufacturer’s installation guidance for the specific product you buy.

Can I install stone edging without a base?

You can, but a compacted base of crushed stone or paver base greatly reduces heaving and settling. Skipping it usually leads to a border that shifts within a season or two.

When should I consult a professional?

If the border runs along a driveway, retaining wall or slope, or if the soil is very wet or unstable, talk to a licensed landscape contractor. They can confirm the base depth and drainage needed for your site.

Conclusion

Choosing landscape edging stone nearby comes down to matching the stone type to your garden, measuring carefully, and preparing a solid base. Verify stock and delivery details with local suppliers before you buy. With those steps done, you can set a border that stays straight and clean for years.

Ready to choose one?

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our lawn edging & trimming guides, checking product details against manufacturer specifications and owner feedback.