By Owen HayesUpdated November 2026
Shopping for landscape edging 6 inch tall usually comes down to one question: will this strip keep grass out of your beds without shifting, cracking or disappearing into the soil after a season? A 6-inch depth is a common middle ground. It is tall enough to hold back turf roots and mulch, yet short enough to bury cleanly with a spade or a few stakes. The picks below were chosen by comparing manufacturer specifications, brand reputation and the patterns owners tend to mention in reviews, focusing on material, length per package, anchoring method and suitability for lawns and flower beds.
Our top picks at a glance
- 1
TOP CHOICEBest overall6 Inch Tall 66 ft Length Landscape Plastic Edging Kit with Hammer SpikesView on Amazon - 2
TOP CHOICEBest for no-dig installs6 Inch Tall 33 ft No Dig Landscape Plastic Edging KitView on Amazon - 3
TOP CHOICEBest for clean metal linesVEVOR Galvanized Steel Landscape Edging, 6-Pack 40 x 6 InchView on Amazon - 4
Best for long-term durabilityHammer-in Landscape Edging 48-inch Strips, 6-inch Depth, COR-Ten SteelView on Amazon - 5
Best budget pickAmazon Basics Flexible Landscape Edging Coil, 5 inch x 40 ftView on Amazon
Our Top Picks
The table below gives a quick overview. Each product is then covered in more detail.
| Product | Best for | Key feature |
|---|---|---|
| 6 Inch Tall 66 ft Landscape Plastic Edging Kit | Large beds and full-yard borders | 66 ft total length with hammer spikes |
| 6 Inch Tall 33 ft No Dig Landscape Plastic Edging Kit | Smaller beds and quick installs | No-dig design with 33 ft length |
| VEVOR Galvanized Steel Landscape Edging | Crisp, straight-line metal borders | Galvanized steel with 6 mounting clips |
| Hammer-in Landscape Edging (COR-Ten Steel) | Permanent borders that resist weathering | COR-Ten steel with rounded top edge |
| Amazon Basics Flexible Landscape Edging Coil | Curved beds and budget projects | Flexible coil that bends around curves |
6 Inch Tall 66 ft Length Landscape Plastic Edging Kit with Hammer Spikes
6 Inch Tall 66 ft Length Landscape Plastic Edging Kit with Hammer Spikes Plastic Garden Flower Bed Edging Landscape Border for Gardens Border Grass Yard Lawn (Black)
Best for: Large beds and full-yard borders where you need one continuous run with fewer seams.
This kit suits homeowners outlining long flower bed perimeters, vegetable garden borders or lawn edges along driveways and walkways. The 66-foot total length covers a lot of ground in one purchase, and the hammer spikes let you install it without digging a trench.
Key specs
- Height: 6 inches
- Total length: 66 feet
- Material: plastic
- Color: black
- Anchoring: hammer spikes included
Pros
- Long total run covers large projects in one kit
- Hammer spikes make installation fast with basic tools
- Black color blends into mulch and dark soil
Cons
- Plastic can flex or bow in tight, sharp curves
- Spikes may need extra stakes on loose or sandy soil
Bottom line: A strong choice for homeowners who need to edge a large area and want a simple, one-kit solution.
6 Inch Tall 33 ft No Dig Landscape Plastic Edging Kit
6 Inch Tall 33 ft Length No Dig Landscape Plastic Edging Kit with Hammer Spikes Plastic Garden Flower Bed Edging Landscape Edging Border for Gardens Border Lawn Grass Yard(Black)
Best for: Smaller beds and quick weekend installs with no trenching.
This is a practical pick for shorter runs around trees, mailboxes or a single raised bed. The 33-foot length is easier to handle and transport, and the no-dig approach suits renters or anyone who wants to avoid heavy excavation.
Key specs
- Height: 6 inches
- Total length: 33 feet
- Material: plastic
- Color: black
- Installation: no-dig with hammer spikes
Pros
- Shorter length is easier to store and handle
- No-dig design reduces prep time
- Works well on lightly compacted soil
Cons
- Less total length if you have a large yard
- Thin plastic may need reinforcement stakes in heavy soil
Bottom line: Best for homeowners with smaller beds who want a no-dig, low-effort install.
VEVOR Galvanized Steel Landscape Edging, 6-Pack 40 x 6 Inch
VEVOR Galvanized Steel Landscape Edging, 6-Pack 40 x 6 Inch Metal Edging for Landscaping with 6 Mounting Clips, Bendable Metal Garden Edge Border for Flower Bed, Yard Pathway, Black
Best for: Crisp, straight-line metal borders that hold a clean lawn edge.
Steel edging appeals to people who want a defined, modern look. Each strip is 40 inches long and 6 inches tall, so the six-pack covers roughly 20 linear feet. The included mounting clips help join sections into a continuous line.
Key specs
- Height: 6 inches
- Strip length: 40 inches each, 6 pieces
- Material: galvanized steel
- Included: 6 mounting clips
- Color: black
Pros
- Galvanized coating resists rust better than bare steel
- Clips create tight, consistent joints
- Bendable strips form gentle curves
Cons
- Sharp top edges need care during handling
- Six pieces may not be enough for long perimeters
Bottom line: A good match for those who want a sleek, metal line along beds, paths or lawn edges.
Hammer-in Landscape Edging 48-inch Strips, 6-inch Depth, COR-Ten Steel
Hammer-in Landscape Edging – 48-inch Strips – 6-inch Depth 1/4-inch Rounded top COR-Ten Steel (5 Pack)
Best for: Permanent borders that need to stand up to weather and years of mowing.
COR-Ten is a weathering steel that forms a stable surface oxide layer, which many owners prefer for its rustic, earthy appearance. The rounded top edge reduces the chance of cuts, and the 6-inch depth matches a standard lawn border.
Key specs
- Height: 6 inches (depth)
- Strip length: 48 inches
- Pack count: 5 strips
- Material: COR-Ten steel
- Top edge: 1/4-inch rounded
Pros
- Weathering steel develops a protective patina over time
- Rounded top edge is safer around kids and pets
- Hammer-in design allows secure, permanent placement
Cons
- Strip count is limited, so longer runs need more packs
- Requires a mallet and some effort to drive in evenly
Bottom line: The right choice when you want a long-lasting, low-maintenance border and don’t mind a bit of hammering.
Amazon Basics Flexible Landscape Edging Coil, 5 inch x 40 ft
Amazon Basics Flexible Landscape Edging Coil for Garden Border, Flower Beds, Lawn and Pathways, 5 inch x 40ft, Brown, 10 Stakes
Best for: Curved beds and budget-conscious projects that need a lot of length.
Flexible coil edging is easy to shape around tree rings, curved paths and irregular garden beds. Note that the listing states a 5-inch width; check the height against your needs, since many 6-inch projects use a different profile.
Key specs
- Dimensions: 5 inches x 40 feet
- Color: brown
- Included: 10 stakes
- Material: flexible landscape edging
Pros
- Bends easily around curves and circles
- Long 40-foot coil covers extended borders
- Brown color blends with natural mulch
Cons
- Listed height is 5 inches, not 6, so confirm fit for your project
- Stakes may need reinforcing in firm or rocky soil
Bottom line: A sensible budget option for curved borders, provided its height matches your plans.
Buying Guide
Choosing the right landscape edging 6 inch product depends on a handful of practical factors. Work through these before you buy.
Material: Plastic, Steel, or Something Else
Plastic is lightweight, affordable and simple to cut. It can flex, so it works best for gentle curves and moderate traffic zones. Galvanized and COR-Ten steel hold a sharp line and resist mower strikes better, but they cost more in effort to install and need careful handling of their edges.
Good picks for this: 6 Inch Tall 66 ft Length Landscape Plastic Edging Kit; Hammer-in Landscape Edging (COR-Ten Steel)
Length and Coverage
Measure your border perimeter before shopping. Add 10 percent for cuts, overlaps and corners. A 66-foot kit suits a large yard, while a 33-foot kit fits a single bed or a short walkway run.
Good picks for this: 6 Inch Tall 66 ft Length Landscape Plastic Edging Kit; 6 Inch Tall 33 ft No Dig Landscape Plastic Edging Kit
Height and Depth
A 6-inch height is a versatile middle size. Plan for about 3 to 4 inches above grade and the rest buried, which gives enough stability against soil pressure and root intrusion. Always confirm the listed height, since some coils and kits are sold in other dimensions.
Good picks for this: VEVOR Galvanized Steel Landscape Edging; Amazon Basics Flexible Landscape Edging Coil
Installation Method
Hammer-spike and no-dig systems are fast and need no trench. Steel strips usually need a shallow trench and a mallet. Trenched installs produce the most stable result on slopes or heavy clay soil.
Good picks for this: 6 Inch Tall 33 ft No Dig Landscape Plastic Edging Kit; Hammer-in Landscape Edging (COR-Ten Steel)
Curves and Shape
Straight runs suit rigid metal. Tight curves, circles and freeform beds call for flexible plastic or coil edging. Mark your layout with a garden hose or spray paint before buying so you know how much bending the product must handle.
Good picks for this: Amazon Basics Flexible Landscape Edging Coil; 6 Inch Tall 66 ft Length Landscape Plastic Edging Kit
Durability and Weather Resistance
Galvanized coatings and weathering steel resist corrosion. UV exposure can make some plastics brittle over several seasons, so look for UV-stabilized material if your yard gets strong sun.
Good picks for this: Hammer-in Landscape Edging (COR-Ten Steel); VEVOR Galvanized Steel Landscape Edging
Safety and Appearance
Rounded or capped top edges reduce the risk of cuts during mowing and planting. Color also matters: black edging tends to disappear against dark mulch, while brown or natural tones blend into wood chips.
Good picks for this: Hammer-in Landscape Edging (COR-Ten Steel); Amazon Basics Flexible Landscape Edging Coil
FAQ
Is 6 inch landscape edging deep enough for lawns?
For most residential lawns, yes. A 6-inch height, with a few inches buried, is generally enough to stop turf roots and keep mulch contained. Very aggressive grasses or sloped sites may benefit from deeper installation or added stakes.
How deep should I bury 6 inch edging?
Many installers bury roughly 2 inches and leave about 4 inches above grade. Check the manufacturer’s instructions, since recommended burial depth varies by product.
Can I install 6 inch edging without digging?
Yes, some plastic kits are designed for no-dig installation using hammer spikes. Soft or loose soil works best. Compacted or rocky ground may require a shallow trench for a secure fit.
Does steel edging rust?
Galvanized steel has a zinc coating that slows rust. COR-Ten steel forms a protective surface layer over time. Neither is rust-proof, but both generally hold up well in outdoor settings.
How many stakes do I need per foot?
A common guideline is one stake every 2 to 3 feet, with extra stakes at curves and joints. Follow the stake spacing listed by the specific product you buy.
Will plastic edging hold up to a lawn mower?
Plastic edging can handle light contact, but repeated mower strikes may chip or bend it over time. Keeping the mower wheel slightly off the edge helps extend its life.
Conclusion
For most yards, the 66-foot plastic kit offers the most coverage for the effort, while the 33-foot no-dig kit suits smaller beds. Homeowners who want a crisp, metal line should consider the galvanized steel six-pack, and those seeking long-term durability will find the COR-Ten strips a strong option. The flexible coil works well for curves if its 5-inch listed height fits your plan. Measure your perimeter, confirm the height, and match the material to your soil and mowing habits.
Sources
- Research-based guidance on landscape bed design, mulching and edging practices from land-grant university extension programs (extension.org)
- Information on soil types, compaction and drainage relevant to choosing and installing garden borders (usda.gov)
Related reading
- 8 Best 12 Inch Tall Landscape Edgings for Clean Borders in 2026
- 6 Inch Metal Landscape Edging: A Step-by-Step Installation Guide
- 5 Best 4 Inch No-Dig Landscape Edging Options for Clean Lines (2026)
- Wood Landscape Timber Edging: A Step-by-Step Install Guide
- What Are the Best Options for Landscape Edging? 7 Choices Compared
About Owen Hayes
Owen writes about lawn edging & trimming. Each guide starts with research into how products are built and what owners report after months of use, and is revised when better options appear.
