Updated November 2026

A lawn edger at Menards can give you crisp, professional-looking borders along walkways, driveways and garden beds, but only if you match the tool to your yard and your edging habits. This guide explains the main edger types you will find at Menards, the features that matter most, how to set up and use your edger, and the mistakes that cause poor results. By the end, you should know which style fits your lawn and how to get clean lines from the first pass.

What Types of Lawn Edgers Does Menards Typically Carry?

Store inventory changes by location and season, so always check the current selection on the Menards website or call your local store. In general, edgers fall into a few categories, and knowing them makes shopping much easier.

Shopping for one? See our guide: John Deere 3 Lawn Edger vs Typical Walk-Behind Edger: Which Should You Choose?.

  • Manual half-moon edgers: A hand tool with a curved steel blade you push into the soil by foot. Good for small beds and short edging runs. See Manual Lawn Edgers: Half-Moon Edgers and Shears for more on this style.
  • Electric edgers: Corded or battery-powered units with a rotating blade or string head. Lighter than gas models and quieter, which suits small to medium yards.
  • Gas edgers: Two-stroke or four-stroke engines that handle thick sod and long runs. Heavier and louder, but they cut through tough turf efficiently.
  • Attachments for string trimmers: Edging heads that mount to an existing trimmer shaft. Useful if you already own a trimmer and want to avoid buying a separate tool.

If you are comparing battery models specifically, the guide Best Cordless Lawn Edgers: 5 Battery Edgers Compared covers how runtime and blade design differ across brands.

How Do You Choose the Right Edger for Your Yard?

Start with the size and shape of the edges you need to cut. Measure the total length of walkways, driveway borders and bed lines, then decide how often you plan to edge.

Match the Tool to the Job Size

  1. Under 100 linear feet of edging, a manual half-moon edger or a light electric model is usually enough.
  2. Between 100 and 300 linear feet, a battery or corded electric edger with a wheel guide saves time and effort.
  3. Over 300 linear feet or with thick, established sod, a gas walk-behind or heavy-duty handheld edger performs better.

Check Power Source and Runtime

Battery edgers avoid cords and fuel, but runtime depends on battery capacity and blade load. Manufacturers typically list runtime under light use, so expect less when cutting dense, dry turf. Corded models give consistent power but limit your range to the cord length. Gas models offer unlimited runtime between refuelings but need regular maintenance.

Look at Blade Width and Depth Control

Wider blades cover more ground per pass, while narrow blades reach tight curves. Adjustable cutting depth helps you set a clean vertical edge without digging too deep into the soil. Wheel guides keep the cut straight along hard surfaces.

What Do You Need Before You Start Edging?

Gather these supplies before you begin so you are not interrupted mid-job:

  • Lawn edger appropriate to your yard size
  • Stakes and a string line for long, straight runs
  • Landscape marking paint or a garden hose to outline curves
  • Safety glasses and hearing protection
  • Work gloves and closed-toe shoes
  • A stiff broom or leaf blower to clear debris afterward
  • Spare blade or replacement string, depending on the model

How Do You Set Up and Use a Lawn Edger Step by Step?

Step 1: Mark the Edge Line

Lay out the path with a garden hose for curves or a string line for straight edges. Mark the line with landscape paint so you can follow it clearly. Do this on dry, firm soil if possible; saturated ground smears and makes the line harder to see.

Step 2: Set the Cutting Depth

Adjust the depth so the blade or string head cuts about one to two inches into the soil. This creates a clean vertical wall between turf and bed. Test on a short section first and adjust if the cut is too shallow or too deep.

Step 3: Make the First Pass Slowly

Walk at a steady pace and let the tool do the cutting. Forcing the edger causes wandering lines and uneven walls. On a power edger, keep the wheel or guide riding on the hard surface where possible.

Step 4: Work in Sections

For long runs, break the job into sections of 20 to 30 feet. This keeps your line straight and makes it easier to correct drift. Overlap slightly at the end of each section.

Step 5: Clean Up

Remove clippings and loose soil with a broom or blower. A clean edge looks sharp; debris lying on the border undoes the effort.

Common Mistakes to Avoid

  • Edging wet soil: Wet ground clumps and tears instead of cutting cleanly.
  • Cutting too deep in one pass: Multiple light passes give a cleaner result than one aggressive cut.
  • Skipping the line: Freehanding long straight edges almost always produces wavy lines.
  • Dull blades: A dull blade drags and shreds turf. Replace or sharpen blades on schedule. The guide on Blade for Lawn Edger: How to Choose, Fit and Replace It for Clean Edges explains how to do this.
  • Ignoring the manufacturer’s manual: Guards, start procedures and maximum cutting depths are specified for a reason.

Tips for Cleaner Results

  • Edge every few weeks during the growing season to keep lines from softening.
  • Water the lawn a day before edging so the soil is moist but not soggy.
  • Store the edger dry and clean the blade after each use to prevent rust.
  • For a tighter look along curved beds, combine a power edger with a manual half-moon tool for detail corners.

If you are weighing a walk-behind model against a handheld one, Lawn Edger vs Weed Wacker: Which Should You Choose? offers a useful side-by-side comparison.

These items pair well with most lawn edgers and help you get straighter, cleaner results.

  • Landscape marking paint: Lets you outline curves and straight lines before cutting, so you are not guessing where the edge should go. View on Amazon
  • Garden hose: A flexible, lightweight hose is one of the easiest ways to lay out curved bed lines. View on Amazon
  • Edging string line and stakes: Keeps long straight runs true and gives you a visual guide for each pass. View on Amazon
  • Safety glasses: Protect your eyes from flying clods, grass and gravel when running any power edger. View on Amazon

FAQ

Does Menards sell lawn edgers?

Yes, Menards typically stocks manual, electric and gas edgers, though the exact selection varies by store and season. Check the current inventory online or call your local store before visiting.

What is the difference between a lawn edger and a string trimmer?

An edger cuts a vertical border between turf and a hard surface or bed, while a string trimmer cuts grass horizontally around obstacles. Some trimmers can be fitted with an edging head to do both jobs.

How deep should I cut when edging?

Aim for about one to two inches. This is deep enough to create a clean wall without damaging the root zone of nearby beds or stressing the lawn.

How often should I edge my lawn?

Most lawns benefit from edging every two to four weeks during the active growing season. Lawns with fast-growing turf or heavy foot traffic may need it more often.

Can I use a battery lawn edger on wet grass?

It is better to wait. Wet grass and soil clog blades, reduce cutting quality and can be unsafe on slippery ground. Check your model’s manual for specific guidance.

Do I need to sharpen an edger blade?

Steel blades on many edgers can be sharpened with a file, though some are designed to be replaced. Follow the manufacturer’s guidance, and consider a professional service if you are unsure.

Is a manual edger enough for a small yard?

For a small yard with limited edging, yes. A manual half-moon edger gives excellent control and requires no fuel, power or charging.

Conclusion

Choosing a lawn edger at Menards comes down to matching the tool to your edging length, turf density and power preference. Mark your lines, set the right cutting depth and work in short sections for the cleanest results. With regular maintenance and a sharp blade, your edges will stay crisp through the growing season.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our lawn edging & trimming guides, checking product details against manufacturer specifications and owner feedback.