Updated November 2026
Learning how to edge a lawn with an edger takes about an hour for a typical yard, and the result is a crisp border between turf and beds, walks or driveways. You will mark a line, set the cutting depth and follow a steady path that keeps the edge straight. The steps below work for most manual and power edgers.
Prepare the Lawn and Edges
Start by mowing the grass to its normal height so the blade has a clean target. Clear debris, sticks and toys from the border, since a hidden rock can bounce the edger and ruin a straight run. Water the lawn a day before if the soil is hard and dry, because moist soil cuts more cleanly and leaves a sharper vertical wall.
Shopping for one? See our guide: Top 7 Cordless Edgers for Lawn Picks Compared for Clean Edges.
Mark a Clean Line
A straight, even edge depends on a line you can follow. Lay a garden hose or spray paint along the curve you want, or run a string line between stakes for long straight runs. Step back and check the shape from several angles before you cut, because it is far easier to adjust a line now than to fix a wobbly edge later.
Set the Depth and Cut the Edge
Adjust the blade so it cuts about 1 to 2 inches deep into the soil, enough to slice roots without digging a trench. Work with the edger’s wheel or guide riding on the hard surface, whether that is concrete or the top of a bed, and let the blade cut into the turf beside the line. Move at a slow, steady walking pace and keep the tool upright so the cut stays vertical.
Work in Short Sections
Cut one section at a time, usually 6 to 10 feet, then lift the edger, reposition and continue. Overlapping each pass by a few inches keeps joints from showing and prevents gaps where the blade skipped. Clear loose sod from the trench as you go so the next pass does not drag clumps across the line. How to Choose a Garden Hose for a Bee-Friendly Lawn goes further into this.
Tools and Steps Checklist
- Mow the lawn to its normal height and clear debris.
- Mark the edge line with a hose, paint or string.
- Set the cutting depth to about 1 to 2 inches.
- Walk the edger along the line at a slow, steady pace.
- Remove loose sod and rake the trench clean.
- Check the edge for gaps and clean up the edge of the bed.
Common Mistakes
- Setting the blade too deep, which digs a trench and damages nearby roots.
- Cutting in wet, heavy soil, which smears the edge rather than slicing it.
- Skipping the line-marking step, which leads to wavy, uneven borders.
- Edging a dry lawn, which tears turf instead of cutting it.
- Forgetting to rake out loose sod, which makes the border look messy.
Recommended Gear
A sturdy manual edger gives you control on small beds and curved borders, and owners often report that it is easy to store. For longer runs, a power edger covers ground faster, though it takes more care to keep the blade on the line. A landscape marking paint or a string line keeps your path straight from start to finish.
- A manual edger for tight curves and small yards. View on Amazon
- A power edger for long, straight borders. View on Amazon
- A marking paint or string line for a guide. View on Amazon
FAQ
How deep should I set my lawn edger?
Set the blade to cut roughly 1 to 2 inches into the soil. That depth slices the turf and roots cleanly without digging a deep trench.
When is the best time to edge a lawn?
Edge when the soil is slightly moist but not soggy, typically after a light rain or a day after watering. Dry, hard ground can tear the grass rather than cut it.
How often should I edge my lawn?
Most homeowners edge every two to four weeks during the growing season. Edge more often if grass creeps into beds quickly in your area.
Conclusion
Mark your line, set the depth, and work in short, overlapping sections, and you will get a clean border every time. Consistent technique matters more than speed. Keep the edger upright and the pace steady, and the edge will stay sharp between cuts.
Related reading
- Stainless Steel Lawn Edger: How to Choose and Use One for Clean Edges
- Manual Lawn Edger Menards: How to Choose and Use One for Clean Edges
- Lawn Edger at Menards: How to Choose the Right One for Clean Edges
- Lawn Edger Manual Wheel: How to Choose and Use One for Clean Edges
- How to Use a Rotary Lawn Edger: A Step-by-Step Guide for Clean Edges
