Menards Landscape Edging Bricks Price: What to Expect and How to Save

By Lauren Holland

Updated November 2026

If you are shopping for menards landscape edging bricks price information, the short answer is that cost depends mostly on the brick style, the material (concrete, clay, or rubber-look composite), how many linear feet you need, and whether you buy by the piece or by the pallet. This guide walks you through how to measure your project, compare brick types, estimate how many units to buy, and avoid the mistakes that add waste and surprise trips to the store. Note that store pricing changes often, so confirm current figures in-store or on the Menards website before you plan your budget.

Why Menards Landscape Edging Bricks Price Varies So Much

Edging brick does not come in one standard size or finish, so two products that look similar can differ quite a bit in what they cost to buy and install. Understanding the main variables helps you compare fairly instead of comparing the sticker on one shelf to the sticker on another.

Shopping for one? See our guide: 5 Best Menards Landscape Edging Bricks for Clean Lawn Lines (2026).

Material and finish

Concrete pavers and retaining-style bricks are the most common choice for borders because they are heavy, weather well and hold their shape. Clay-look bricks cost differently depending on whether they are fired clay or molded concrete with a clay appearance. Rubber-look composite edging is a separate category that is usually sold in long rolls or sections rather than individual bricks, so it is hard to compare by the brick unit.

Size and shape

Standard rectangular pavers, Roman-style bricks, and interlocking curved pieces each have different dimensions. A larger brick covers more linear feet per piece, which can reduce the count you need but may increase the per-piece cost. Always compare on a per-linear-foot basis rather than per brick.

Quantity and packaging

Bricks are often sold in pallets, bundles, or individual units. Buying a full pallet frequently lowers the per-piece figure, but only if you will use it. Partial bundles are easier to carry but can cost more per unit.

Color and style collections

Blended colors, tumbled finishes, and coordinated sets tend to sit at a different price point than basic single-color options. If you are matching existing patio pavers or a home’s brick, the matching product may cost more but save you from a mismatched border.

Step 1: Measure Your Border Accurately

Accurate measurement is the single best way to control what you spend. Overbuying leaves you with leftover product, and underbuying forces a second trip where the color or batch may not match.

1. Walk the full perimeter of each bed or lawn edge with a measuring tape or a long string. Record the total run in feet.
2. Add 10 percent to the total length to cover cuts, corners and minor errors.
3. Note any curves. Curved sections often need extra bricks or specialty pieces because the cuts waste more material.
4. Measure the exposed height you want. Most homeowners set edging so 1 to 2 inches show above grade.

Converting length to brick count

Divide your total linear feet (with the 10 percent buffer) by the length of one brick in feet. For a brick that measures 8 inches long, each piece covers about 0.67 feet, so a 100-foot border needs roughly 165 bricks before waste. Check the manufacturer’s listed dimensions, since actual lengths vary slightly between product lines.

Step 2: Compare Brick Types Before You Buy

Different brick types suit different conditions. A brick that works well in a flat, well-drained bed may not hold up along a sloped lawn where soil shifts.

For a more detailed look at specific installation methods, see Groundsmart Roman Brick Landscape Edging: Install Steps for Clean Lines and Groundsmart 4 Roman Brick Rubber Landscape Edging: Install Steps for Clean Lines. If you are weighing brick against other materials, What Are the Best Options for Landscape Edging? 7 Choices Compared gives a useful side-by-side view.

Step 3: Estimate Your Full Project Budget

Brick is only one part of the cost. Plan for the supporting materials that make the border last.

• Base gravel, typically crushed stone, to create a firm foundation
• Paver sand or leveling sand for setting bricks
• Landscape fabric to slow weeds
• Edge stakes or spikes to anchor the row
• Polymeric sand if you plan to set joints between bricks

Installing bricks on your own saves labor, but it does take time. If you are considering hiring out the job, How Much Does Landscape Edging Installation Cost? Price Factors Explained explains how labor and site conditions affect the total. For a sense of how different products handle staking, Spikes for Landscape Edging: A Step-by-Step Guide to Clean Lines covers anchoring methods.

Step 4: Shop Smart at Menards

Once you know your length, brick count, and supporting materials, you can shop efficiently.

1. Check the Menards website for the current listed price per piece or per pallet before visiting the store.
2. Ask whether the brick line you want is available in the color and finish you need, and confirm it is in stock.
3. Compare per-linear-foot cost across two or three products rather than trusting the headline price on one.
4. Ask about bulk or pallet pricing if your project is large, and whether delivery is an option for heavy loads.
5. Buy a few extra bricks from the same lot if the product varies by batch.

Step 5: Plan Installation to Avoid Waste

Good installation technique controls how many bricks you end up using. Dig a trench that matches the brick depth, compact the base, set each brick level, and use a string line to keep straight runs true. On curves, cut bricks with a masonry saw rather than forcing whole pieces into place. Keep offcuts, since they can fill short gaps at the end of a run.

Common Mistakes

• Buying by the brick instead of by the foot. Different brick sizes make per-piece comparisons misleading.
• Skipping the 10 percent buffer. Corners, cuts, and breakage almost always use more than the raw measurement.
• Ignoring batch variation. Colors can shift between production runs. Buy the full quantity at once when possible.
• Underestimating base materials. A thin or uneven base causes bricks to heave and sink within a season.
• Choosing a style that does not match the site. Heavy slopes and high-traffic lawn edges need stronger anchoring than a flat garden bed.

Tips for Getting the Most Value

• Plan your project in one season so you can buy everything together.
• Photograph the brick in the store under daylight to judge color accurately.
• Keep receipts and product labels in case you need to match a replacement later.
• Test a single section of border before committing to the full run, especially if you are mixing brick with another material.

Recommended gear

A few supplies make the installation cleaner and help the border last. A masonry saw or wet tile saw handles cuts on concrete bricks. View on Amazon models are widely used for this job. A string line and line level keep long runs straight and level, and View on Amazon sets are a common choice. A plate compactor firms the gravel base before you set the bricks, and View on Amazon units suit small to medium projects. A rubber mallet lets you tap each brick into position without chipping the edges, and View on Amazon options are inexpensive and effective.

FAQ

What affects menards landscape edging bricks price the most?

The biggest factors are brick material, size, finish, and whether you buy individual pieces or a full pallet. Comparing cost per linear foot gives the fairest picture across different products.

How many bricks do I need for a 50-foot border?

Add 10 percent to 50 feet to get 55 feet. If each brick is 8 inches long (0.67 feet), you need about 82 bricks. Round up slightly for cuts and breakage.

Should I buy extra bricks?

Yes. A buffer of 5 to 10 percent covers cutting waste, corners and damaged pieces. Buying from the same batch also helps avoid color mismatch.

Is it cheaper to buy bricks or rubber edging?

It depends on the length and style. Rubber-look edging is sold by length and can suit curves, while brick is priced by the piece. Compare total cost for your specific layout.

Do I need a base under edging bricks?

For most installations, yes. A compacted gravel base and a layer of leveling sand keep bricks from shifting, especially on slopes or in freeze-thaw climates.

Can I install edging bricks myself?

Many homeowners do. The work requires digging, leveling and patience. If the site has steep grades, large curves or poor drainage, consider consulting a landscape professional before starting.

Do bricks need to be sealed?

Some concrete bricks benefit from a penetrating sealer to resist staining and efflorescence. Check the manufacturer’s guidance for your specific product.

How do I keep edging bricks from sinking?

Use a deep, compacted gravel base, set bricks on a thin layer of sand, and check level as you go. Good drainage away from the border also helps prevent settling.

Conclusion

Menards landscape edging bricks price depends on material, size, finish and how you buy, so the most reliable way to budget is to measure your border, add a buffer, and compare cost per linear foot. Confirm current pricing on the Menards website or in store before you commit. With accurate measurements and a solid base, your brick border can hold clean lines for years.

Related reading

• Metal Landscape Edging Menards: Step-by-Step Install Guide

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our lawn edging & trimming guides, checking product details against manufacturer specifications and owner feedback.